HOW TO ATTACH THE DRAIN PAN (OPTIONAL)
1 Remove the rubber plug and 3 Connect a drain hose (optional).
slide the chassis out from the cabinet.
Fit the drain hose to the drain pan.
EXTERNAL VIEW
Remove the rubber plug
NOTE Drain hose or tubing can be purchased locally to satisfy your particular needs.
4 Slide the chassis back
Drain hose (not included) Under-side view with drain pan and hose in place.
2 Install the optional drain pan (part no. CWH40175).
Install the drain pan at the right corner of the cabinet using 2 screws (part no. CWG86C733). NOTE The drain pan (part no. CWH40175) can be obtained from nearest servicenter.
Screws Drain pan (optional) INTERNAL VIEW
into the cabinet. Reinstall the cabinet to chassis by using screws.
3
MAIN UNIT 1 6 7 4 8 5 9 3
TH
AIR SWIN OFF G ON
2
1 Air inlet louver
4 Air filter
2 Cabinet 5 Front intake grille 3 Power cord 6 Front grille 7 Vertical airflow direction vane (Airflow direction adjustment up-down). The vertical airflow direction vane is controlled by rotating the horizontal vane forward or backward.
8 Ventilation lever
AIR SWING OFF
THE RMO STAT
5 4 3 2 1 10 6 7 8 9 LOW FAN HIGH FAN
ON
The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN
HIGH COOL
LOW COOL
OFF
position. The damper is opened and room air is drawn out.
9 Main control panel
OFF
AIR SWING OFF ON
AIR SWING ON
a
a Air Swing Switch
OFF Stops the operation of Air Swing. ON Air Swing is in operation. (Only for LOW COOL, MED COOL, HIGH COOL and ECONOMY operation.)
THERMOSTAT
5 4 6 7 8 9 1 10 LOW FAN HIGH FAN LOW COOL HIGH COOL
c
3 2
OFF
b
b Main Control Knob
High fan speed operation (without cooling)
LOW FAN HIGH FAN LOW COOL
Low fan speed operation (without cooling) Stops all operation
Low fan speed with cooling operation High fan speed with cooling operation
OFF
HIGH COOL
c Thermostat Control Knob
THERMOSTAT
5 4 6 7 8 9 1 10
Principal
Derechos © 2024 Owner-Manuals.com.
