a. Focus Adjustment
1) Confirm that the black line (C, D) in the nine portions are visible.
OPT HPOS 0024
b. Mechanical Picture Position Adjustment (Tilt)
1) Loosen the 4 Screws on the Projection Unit.
Screw Screw Twist Twist
Screw Screw
<MMD-CHK 2/8>
C
<Front View>
Fig. M1-5 2) Adjust the Projection Lens by twisting so that the long line "g" and the long line "h" are within 4 dots. (The long line "g" and the long line "h" will be almost aligned horizontally.)
D
OPT HPOS 0024
2) If not, loosen the Knob on the Projection Lens until the Knob can be moved. Then, adjust the focus by moving up or down the Knob.
Tighten Knob "G"
<MMD-CHK 2/8>
"H"
long line "g" Loosen
long line "h"
"G" Up
within 4 dots
"H"
Note: If the Projection Lens is twisted left, the Focus Screen twists left. If the Projection Lens is twisted right, the Focus Screen twists right. 3) Tighten the 4 Screws while fixing the Projection Lens.
