|
|
|
Usuarios conectados
Actualmente hay 5997 visitantes y
2 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Phenomenon Storage is not possible. Setting the time signature is not possible.
Remedy � The remaining memory capacity of the COMPOSER is 0. � The time signature cannot be changed for a pattern which is currently recorded in the COMPOSER. If you wish to change the time signature, first follow the procedure to clear the memory.
The playback timing of the rhythm pattern is � The QUANTIZE function was on when the pattern was different from the timing with which it was recorded. recorded and the timing was automatically corrected. Set the quantize level to a smaller note unit or to OFF when recording. The Disk Drive produces a noise during recording � This occurs when the Disk Drive is reading a disk. It or playback. does not indicate a problem. When the procedure to load from a disk is per- � When performing the load operation from a disk, the formed, the contents of the keyboard memory are keyboard memory changes to that of the data loaded erased. from the disk. If you wish to preserve a song which is stored in the keyboard memory, save it on a disk before performing the load procedure. Data cannot be exchanged through MIDI terminals. � The switch for the COMPUTER terminal is not set to MIDI. Turn off the power to this instrument and set the switch to MIDI. � Match the channels on the transmitting side and the receiving side. The sound quavers or is distorted. � When the COMPUTER terminal or both the MIDI IN and OUT terminals are connected to a computer, depending on the computer software the received data may be sent back to the instrument just as it is. Because of this the sound generated from the keys and the sound generated from the returned data are both produced, causing undesirable effects, such as the sounds canceling each other out, for example. In this case, either change the software settings to prevent received data from being returned, or set the MIDI LOCAL CONTROL to off. � This sometimes occurs when electrical equipment such as a radio or TV is used near the instrument. Try moving such electrical equipment further away from the instrument. � The sound may be coming from a nearby broadcast station or amateur radio station. If the sound is bothersome, consult your dealer or service center. � This instrument has a built-in power source that heats the cabinet to some degree. This is not an indication of trouble.
Noise from a radio or TV can be heard.
Other MIDI Disk Drive COMPOSER The cabinet becomes warm during use.
|
|
|
> |
|
